FY 2016 Advanced Methods for Manufacturing Program Review Meeting

The Advanced Methods for Manufacturing (AMM) program held its annual review meeting on October 18-19, 2016 in Germantown, Md. The purpose of this meeting was to review the currently funded projects encompassing additive manufacturing, welding and joini...

Office of Nuclear Energy

October 31, 2016

The Advanced Methods for Manufacturing (AMM) program held its annual review meeting on October 18-19, 2016 in Germantown, Md. The purpose of this meeting was to review the currently funded projects encompassing additive manufacturing, welding and joining technologies, concrete materials and rebar innovations, surface modification and cladding processes, and imaging techniques for design reconstruction.

The presentations are available here:

AMM Workshop Agenda 2016.pdf (26.66 KB)

01 - AMM Overview Presentation.pdf (466.32 KB)

02 - EPRI SMR Reactor Vessel Manufacture-Fabrication-Demonstration Project.pdf (2.33 MB)

03 - High speed 3D capture for Configuration Management.pdf (2.04 MB)

04 - Self-Consolidating Concrete Construction for Modular Units.pdf (5.17 MB)

05 - Innovative Manufacturing Process for Nuclear Power Plant Components via Powder Metallurgy and Hot Isostatic Processing Methods.pdf (2.26 MB)

06 - Improving Weld Productivity and Quality through Integrated Optical Sensors.pdf (1.94 MB)

07 - Periodic Material-Based Seismic Base Isolators for SMRs.pdf (25.01 MB)

08 - Modular Connection Technologies for SC Walls of SMRs.pdf (8.24 MB)

09 - Improvement of Design Codes to Account for Accident Thermal Effects on Seismic Performance.pdf (1.4 MB)

10 - Environmental Cracking and Irradiation Resistant Stainless Steel by Additive Manufacturing.pdf (3.47 MB)

11 - Prefabricated High-Strength Rebar Systems with High-Performance Concrete for Accelerated Construction of Nuclear Concrete Structures.pdf (5.1 MB)

12 - Advanced Onsite Fabrication of Continuous Large-Scale Structures.pdf (2.72 MB)

13 - Advanced surface plasma nitriding for development of corrosion resistance and accident tolerant fuel cladding.pdf (2.93 MB)

14 - Development of Nuclear Quality Components Using Metal Additive Manufacturing.pdf (18.81 MB)

15 - US Nuclear Infrastructure Council Overview.pdf (261.06 KB)

16 - All-Position Surface Cladding and Modification by Solid-State FSAM.pdf (3.04 MB)

17 - ICME and In-situ Process Monitoring for Rapid Qualification of Components Made by Laser-Based Powder Bed Add.pdf (1.67 MB)

18 - Enhancing irradiation tolerance of steels via nanostructuring by innovative manufacturing techniques.pdf (4.02 MB)

19 - Irradiation Performance Testing of Specimens Produced by Commercially Available Additive Manufacturing Techniques.pdf (3.36 MB)