AMO Peer Review, May 28-29, 2015

AMO conducted a Peer Review of its Research, Development, and Demonstration (RD&D) Facilities, and Analysis activities in Washington, D.C.

Advanced Manufacturing & Industrial Decarbonization

June 12, 2015

The Advanced Manufacturing Office (AMO) conducted a Peer Review of its Research, Development, and Demonstration (RD&D) Facilities, and Analysis activities in Washington, D.C., on May 28-29, 2015. The meeting was open to the public. Leading technology experts from the industrial, academic and government sectors reviewed AMO's program and provided their view on its effectiveness and impact. The Peer Review was held concurrently with the Better Buildings Summit. View the agenda.

The presentations provided at the review are listed below.

Peer Review Presentations

AMO Overview: Peer Review 2015 (2.01 MB)

Introduction – AMO Strategic and Technology Analysis (1.44 MB)

R&D Review - Sustainable Manufacturing via Multi-Scale Physics-Based Process Modeling and Manufacturing-Informed Design (1.26 MB)

R&D Review - High Metal Removal Rate Process for Machining Difficult Materials (1.89 MB)

R&D Review - Coatings and Process Development for Reduced Energy Automotive OEM Manufacturing (974.44 KB)

RD&D Review - Development of Integrated Die Casting Process for Large Thin-Wall Magnesium Applications (945.92 KB)

RD&D Review - Rapid Freeform Sheet Metal Forming: Technology Development and System Verification (2.24 MB)

RD&D Review - Quenching and Partitioning Process Development to Replace Hot Stamping of High Strength Automotive Steel (1.09 MB)

RD&D Review - Hot Rolling Scrap Reduction through Edge Cracking and Surface Defects Control (847.73 KB)

RD&D Review - A Novel Flash Ironmaking Process (1.02 MB)

RD&D Review - A New Method of Low Cost Production of Ti Alloys to Reduce Energy Consumption of Mechanical Systems (1.06 MB)

RD&D Review - High Efficiency 370kW Microturbine with Integral Heat Recovery (819.32 KB)

RD&D Review - Waste Heat-to-Power Using Scroll Expander for Organic Rankine Bottoming Cycle (1.47 MB)

RD&D Review - Advanced, Energy-Efficient Hybrid Membrane System for Industrial Water Reuse (1.62 MB)

RD&D Review - Novel Membranes and Systems for Industrial and Municipal Water Purification and Reuse (1.32 MB)

RD&D Review - Sacrificial Protective Coating Materials that can be Regenerated In-Situ to Enable High Performance and Low Cost Membranes (1.1 MB)

RD&D Review - Bio-Oxo Technology (792.85 KB)

RD&D Review - Conversion of Waste CO2 & Shale Gas to High Value Chemicals (1.11 MB)

RD&D Review - Development and Implementation of an Automatic Continuous Online Monitoring and Control Platform for Polymerization Reactions to Sharply Boost Energy and Resource Efficiency in Polymer Manufacturing (2.23 MB)

RD&D Review - New Design Methods and Algorithms for Energy Efficient Multicomponent Distillation Column Trains (913.04 KB)

RD&D Review - One-Step Hydrogen Generation through Sorption Enhanced Reforming (1.35 MB)

RD&D Review - High-Quality, Low-Cost Bulk Gallium Nitride Substrates Grown by the Electrochemical Solution Growth Method (861.8 KB)

RD&D Review - Carbon Fiber Technology Facility (1.34 MB)

RD&D Review - Low-Cost Bio-Based Carbon Fibers for High-Temperature Processing (1.48 MB)

RD&D Review - Continuous Processing of High Thermal Conductivity Polyethylene Fibers and Sheets (675.98 KB)

RD&D Review - High Thermal Conductivity Polymer Composites for Low-Cost Heat Exchangers (850.02 KB)

RD&D Review - Energy Efficient Thermoplastic Composite Manufacturing (793.69 KB)

RD&D Review - Industrial Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains (1002.89 KB)

RD&D Review - Manufacturing of Protected Lithium Electrodes for Advanced Lithium-Air, Lithium-Water & Lithium-Sulfur Batteries (1.4 MB)

RD&D Review - No-Heat Spray Drying Technology (364.08 KB)

Analysis Review - Materials Flows through Industry (MFI) Tool (2.47 MB)

Analysis Review - LIGHTnUp Tool and Analysis Framework (1.13 MB)

Analysis Review - Prospective Life-Cycle and Technology Analysis (710 KB)

Facilities Review - Critical Materials Institute (4.31 MB)

Facilities Review - Manufacturing Demonstration Facility (8.4 MB)

Facilities Review - Power America (4.74 MB)

Facilities Review - Institute for Advanced Composites Manufacturing Innovation (6.04 MB)

Poster - Cross-Cutting Technologies to Enable Clean Energy Manufacturing (2.06 MB)

Poster - Combined Heat and Power Technology Development (1.63 MB)

Poster - Melt Processing of Covetic Materials (1.38 MB)

Poster - Covetic Materials (957.52 KB)

Poster - An Industrial Membrane System Suitable for Distributed Used Oil Re-refining (3.68 MB)

Poster - High Flux Ti Nanofiltration Membrane (1.46 MB)

Poster - Single Step Manufacturing of Low Catalyst Loading Electrolyzer Membrane Electrode Assemblies (2.94 MB)

Poster - Flash® Processed Steel for Automotive Applications (488.65 KB)

Poster - High Performance Computing for Manufacturing (652.65 KB)

Poster - Accelerating Energy Technology Innovation at Cyclotron Road (594.4 KB)

Poster - AMO Small Business Innovation Research Portfolio (1.47 MB)